Mindomo Requires javascript and the latest version of the Adobe Flash Player Plugin.


Get Adobe Flash player

Design of Mosquito repellant Alternative use of cap - give rubber or sharpner Check heating coil space required Press type clip attachment, when pressed opens and attached to the machine Colour changing material to be provided on the top No deep grooves in the product Spring fitment Thumb impression gripping to be provided After 8 hours the refill disengages from the machine Reflectors can be used Provide extra light with parallel connection Dual functionality of providing mat and refill in same machine no wire or minimum wires, units attached to PCB Fitment to be easy Tight fitment Refil cap goes unused Provision for horizontal wall and holes on that Plug rotates 90 Degrees when power cut - battery takes over - battery light indication Wire routing improvement Full product to be made from one single piece Colour of the product to be dark Forget the put the switch in the morning No screws design - only snap fitment provided WIth out power also the machine will operate Provide light sensor for 8/ 12 hrs Product finish to be smooth and glossy Product size can be reduced and made compact Product should be easy to clean Light power can be increased Hanger provision for coil can also be provided Provide a buzzer - beep sound Product to be made compact Better fitment of refill containers Rib type serations for holding not necessarily cover the bottle onall sides, only heating space needs cover design it like toys or keychain Vapour flow in all direction Internal parts to be placed closer to each other Push type - snap fitment - PUSH with arrow direction Body slips rotate and lock - key way provided Improve funtion Change position of grip to some other place extra holes provided on the top cover Bottle can be made thinner - so overall shape becomes compact LED's - Colour changing LED's - different light source Snap type cap provided, which will hang on the product itself always Cap can be used as a fitment on the main product wire to be routed in a guideway Product be mounted inside the wall itself Taper cone provision with holes on t he sides a clip like provision to be given A light for sensor - autocut off provided no cap atall, when inserting in to machine it automatically opens WIre routing is zig zag In thread type arrow mark indication - OPEN CLOSE Better visibitiy of light Transparency of the top cover increased Machine working understanding magnetic method